Skip to content
Laser Reproductions: Dye Sublimation Experts
Natural Wood Sublimatable Lazy Susan

Natural Wood Sublimatable Lazy Susan

SKU PHOLAZY1
$18.00 - $32.95
$25.00
$18.00 - $32.95
$25.00

Introducing another new product development exclusive to LRI

 

Lazy Susan – 14.5” diameter x 5/8” thick birch plywood

 

This durable Lazy Susan comes to you completely assembled!

It will fit in your 16 x 20” heat press.

You would follow the instructions to unscrew four screws to separate the wood base from the printable top for pressing.

Then press the top, let cool, then reassemble the 9-1/2” square base and it’s ready to deliver!

(you may also consider buying our water-based wood top coat to seal the surface for easy cleaning. SKU PHOBTC)

See our instruction video to best see & understand how you would decorate the Lazy Susan.

The print template would be a circle that print size of 15-1/8” to allow for bleed and registration.

 

If you don’t have a printer that can print this wide, we can assist you.

Give us a call to discuss.  Thanks.

Size: 12" Round
TRANSFER INSTRUCTIONS

Lazy Susan
Transferring Instructions

Read these instructions completely before you begin.
Supplies Needed
• Sublimatable Photo Wood Board or Plank Signs
• Sublimation Transfers
• Heat Gloves
• Thermal Rubber Mat (optional)

Instructions for Wood Photo Boards
Step 1: Adjust Heat Press
Heat Press Temperature: 400 Deg F
Dwell Time: 1 min 35 seconds when using our Thermal Rubber Mat
Or 35 – 45 seconds without using our Thermal Rubber Mat
Pressure: Very Firm

Step 2: Design & Print Your Transfer
Note: Design your transfer based on the Wood Photo Board size. If you are designing a full-bleed image, we recommend that you design the transfer so that it is at least 1/8” larger than the wood around each side.

Step 3: Transfer the Image
1. If you have a manual pressure heat press, pre-set the pressure with the wood facing down. Set to very firm pressure.
2. Place Wood lazy susan face down on onto the transfer and tape in place on two sides.
3. Flip the wood board over so transfer is on top facing down on the wood. Place in the middle of your heat press for uniform pressure.
4. Option to place our thermal rubber mat on top of Wood Photo Board.
5. Using Very Firm pressure, press for 1min 45 seconds at 400 deg. F.

If you don’t have a thermal rubber mat, Wood Photo boards can alternatively be pressed without a mat for 35 to 45 seconds.

DO NOT use a clamshell style heat press!

Technical Support
For support on these or any of our products, please call our toll-free number for assistance:
877.795.1500. You may also write to us at support@laserreproductions.com



Product Information

Dimensions:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)