Keychain Wallet

Lady’s Keychain Wallet Transferring Instructions
Please read these instructions completely before you begin.

Supplies Needed
• Sublimatable Lady’s Keychain Wallet
• EZ-Trans Paper
• Two (2) Felt Pads
• Heat Resistant Tape

Step 1: Adjust the Heat Press
Heat Press Temperature: 400o F
Dwell Time: 1 min 5 seconds
Pressure: Medium-Firm
Note: These instructions, including transfer times and temperatures, are based on the inks, paper, equipment, and supplies we use. Your inks, papers, etc. may require adjustments in your time/temp settings.
Step 2: Design Your Transfer
Design your transfer in the usual manner. Images should be mirrored when the transfer is printed.

Step 3: Transfer the Image

1. Register your keychain wallet with the transfer. Use heat resistant tape to keep the keychain wallet in registration when moving it to the heat press.

2. Place two (2) felt pads on the heat press. And then put a piece of clean bond or newsprint paper down just under the wallet to keep it clean while pressing the top side.

3. Place keychain wallet face up/transfer face down on top of the felt pads.

4. Using medium to firm pressure, press at 400o F for 1 min 5 seconds.


Customer Support

For support on these or any of our products, please call our toll-free number for assistance: 877.795.1500. You may also write to us at support@laserreproductions.com.

Dimensions: 4.5" x 3", 1.25" key ring