Skip to content
"CLICK HERE" Checkout our CLOSE-OUT Section! Tons of Amazing Products & Low Prices! "CLICK HERE"
"CLICK HERE" Checkout our CLOSE-OUT Section! Tons of Amazing Products & Low Prices! "CLICK HERE"


New Sublimation Wood Clock - 12" Round & Square

Original price $19.95 - Original price $19.95
Original price
$19.95 - $19.95
Current price $19.95

New -  12” round  & square photo wood board clock face and mechanism  

The 12” round or square Personalized ¼” thick wood wall clock will hang in any room in the house, garage or porch.
Easy to print, Includes the quartz clock mechanism and hands and hanging bracket, ship alongside.

  • Personalize with any artwork you can dream of, photograph or graphics.

Durable 12” diameter wood clock face print area. Free clock face template downloads from our website.

  • Natural Baltic Birchwood plywood may show slight woodgrain variations in the wood.
  • Measures 12" diameter x total weight is .750"
  • Made in the USA
Style: 12" Square

Photo Wood 12” Round Clock
Transferring Instructions

Read these instructions completely before you begin.
Supplies Needed
• Sublimatable Photo Wood 12” round clock with mechanism
• Sublimation Transfers
• Heat Gloves
• Thermal Rubber Mat (optional)

Pressing Instructions
Step 1: Adjust Heat Press
Heat Press Temperature: 400 Deg F
Dwell Time: 1 min 35 seconds when using our Thermal Rubber Mat
Or 35 – 45 seconds without using our Thermal Rubber Mat
Pressure: Very Firm

Step 2: Design & Print Your Transfer. Download our template on the website.
Note: Design your transfer based on the Wood Photo Board size. If you are designing a full-bleed image, we recommend that you design the transfer so that it is at least 1/8” larger than the wood around each side.

Step 3: Transfer the Image
1. Place Wood Photo board face up on onto the heat press.
2. Place your transfer face-down on top of the Wood Photo Board. Check placement of your transfer so that keyhole aligns with the top of your transfer. Tape the transfer into position on the back of the board in the middle of the transfer on two sides.
3. Option to place our thermal rubber mat on top of Wood Photo Board.
4. Turn wood over coated side up and place in the middle of the heat press.
Using Very Firm pressure, press for 1min 45 seconds at 400 deg. F.

If you don’t have a thermal rubber mat, Wood Photo boards can alternatively be pressed without a mat for 35 to 45 seconds.

Always check for uniformity of print: After pressing holding the center of the transfer with your gloved hand after pressing, and gently pull back both sides of the transfer to insure full color image transfer occurred.
If you are noticing loss of contact color in an area on your board, turn the board 90 degrees and press the board again for an additional 35 seconds.

Consider applying a weight on the back of the wood clock face while cooling to eliminate any warping from the heat press.

Assemble clock face after wood has cooled.

Product Information

Dimensions: 12” round (or square shape) ¼” wood wall clock.

Customer Reviews

Be the first to write a review