Skip to content
"CLICK HERE" Checkout our CLOSE-OUT Section! Tons of Amazing Products & Low Prices! "CLICK HERE"
"CLICK HERE" Checkout our CLOSE-OUT Section! Tons of Amazing Products & Low Prices! "CLICK HERE"
Laser Reproductions: Dye Sublimation Experts
Felt Door Hanger

Felt Door Hanger

SKU FELT-DH
$3.00 - $3.00
$3.00
$3.00 - $3.00
$3.00

Our most affordable product line yet!

These durable felt products are printable from both sides. Print them one at a time, or all at once on 8-1/4" x 11-5/8" sheets.

TRANSFER INSTRUCTIONS

TRANSFER INSTRUCTIONS
Items: Felt Air Fresheners – Round, square, rectangle, coasters, door hangers, felt Luggage Tags, 11x17 Felt Tray Insert

Stacking Order:
HEAT PLATEN
PROTECTIVE PAPER or TEFLON
SUBSTRATE/Felt material
TRANSFER
PROTECTIVE PAPER or TEFLON
BOTTOM TABLE

Required Accessories:
Repositionable Spray Tack Adhesive, Lint Roller
Any sublimation transfer paper:

OUR INSTRUCTIONS ARE BASED ON USING A DK20S.
TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.
Time: 45 SECONDS
Temp: 400 DEGREES
MEDIUM/FIRM PRESSURE

1. Cover the bottom table of the press with a sheet of protective paper.
2. Sticky lint roll the image area of the substrate.
3. Secure transfer to substrate using a repositionable Spray. Simply apply a light spray onto the printed transfer.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Top with protective paper and press according to time, temperature, and pressure above.

Application note: Should substrate warp or buckle after pressing, weight down the substrate while cooling.

Warning: If you choose to use heat tape instead of adhesive spray be careful not to pull the tape off the felt material while still hot as this can cause the felt to distort!

Product Information

Dimensions: 3-1/2" x 7-3/4" Individual
8-1/4" x 11-5/8" Sheet

Three Door Hangers per sheet.